3 L4-2.5L (2010)
Pressure control solenoid A specification
-
2.4-7.3 ohms
Shift solenoid A, B, C specification
-
1.0-4.2 ohms
Shift solenoid D, E specification
-
10.9-26.2 ohms
Secondary Control Valve Body
On-vehicle inspection
1. Perform the following procedures.
a. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
b. Disconnect the negative battery cable.
c. Remove the battery component (ex: battery, battery tray and PCM component). See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement
d. Disconnect the coupler component connector.
2. Measure the resistance between the coupler component terminals A and B.
