3 L4-2.5L (2010)
Clutch Pedal Assembly: Adjustments
CLUTCH PEDAL INSPECTION/ADJUSTMENT
Clutch Pedal Height Inspection
1. Measure the distance from the center of the upper surface of the pedal pad to the floor covering.
-
If the clutch pedal height is not with the specification, replace the clutch pedal.
Clutch pedal height (Reference value)
-
142.8 mm {5.622 in}
Clutch Pedal Free Play Inspection
1. Depress the clutch pedal by hand until clutch resistance is felt.
-
If the clutch pedal free play is not within the specification, replace the clutch pedal.
Clutch pedal free play (Reference value)
-
15 mm {0.59 in} or less
Clutch Pedal Disengagement Point
CAUTION:
-
When performing inspections, always set the wheel blocks, set the parking brake, depress the brake pedal, and then perform the inspection with the
brakes in operation. Otherwise, the vehicle could lurch and cause an accident.
1. Apply the parking brake and fix the front and rear of the wheels with the wheel chocks.
2. Start the engine.
3. With the clutch pedal depressed, move the shift lever to the position just before engaging the reverse gear. (Do not shift completely to reverse
position)