3 L4-2.5L (2010)
-
If there is any malfunction, replace the pilot bearing. See: Service and Repair/Clutch Unit Removal/Installation [A26M-R]
11. Install in the reverse order of removal.
12. Perform the auto leveling system initialization. See: Lighting and Horns/Headlamp/Testing and Inspection/Programming and Relearning
13. Add the specified amount of specified transaxle oil. See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transaxle Oil Replacement [A26M-R]
14. Warm up the engine and transaxle, inspect for oil leakage, and inspect the transaxle operation.
WARNING:
-
Improperly jacking a transaxle is dangerous. It can slip off the jack and may cause serious injury.
NOTE:
-
If the transaxle is overhauled and installed to the vehicle, perform the 'INSPECTION AFTER TRANSAXLE OVERHAUL' and verify that there is
no abnormality. See: Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Inspection After Transaxle Installation
[A26M-R]