3 L4-2.5L (2010)
7. Cut away the old sealant using a utility knife or scraper so that 1-2 mm {0.04-0.07 in} thickness of sealant remains along the perimeter of the
frame.
8. Clean and degrease along the perimeter of the bonding area on the body.
9. If the sealant has come off completely in any one place, apply some primer, and allow it to dry for approx. 30 min.
CAUTION:
-
To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the surface with your
hand.
10. Apply body primer on the body as shown in the figure, then allow it to dry for approx. 30 min.
CAUTION:
-
To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the surface with your
hand.
NOTE:
-
Apply primer to the hollowed marks in the ceramic coating.
