mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

All Technical Service Bulletins for Front Door Window Regulator: > < Body - front Door Window Won't Open Completely
Page 2
background image

front beltline is approximately 80 mm.

b. Disconnect the negative battery cable.

c. Remove the inner garnish.

d. Remove the front door trim.

e. Remove the front door speaker.

f. Remove the hole plugs.

g. Loosen the 2 bolts behind the hole plugs.

h. Align the glass along the door sash.

1. Push the front door glass backwards to align the glass along the door sash.

2. While holding the door glass backwards, tighten the two bolts.

3. Install in the reverse order of removal.

4. Verify repair.

WARRANTY INFORMATION

NOTE:

^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.

^ This repair will be covered under Mazda's New Vehicle Limited Warranty term.

^ Additional diagnostic time cannot be claimed for this repair.

All Technical Service Bulletins for Front Door Window Regulator: > < Body - front Door Window Won't Open Completely