3 L4-2.5L (2010)
Windshield Washer Reservoir: Service and Repair
WASHER TANK REMOVAL/INSTALLATION
Vehicles with the washer fluid-level sensor
1. Disconnect the negative battery cable.
2. Remove the front bumper. See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Front Bumper
Removal/Installation
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Vehicles without the washer fluid-level sensor
1. Disconnect the negative battery cable.
2. Remove the front bumper. See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Front Bumper
Removal/Installation
