mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Timing Belt - Noise|Page 1631 > < Timing Belt - Squeak Noise at Idle from Front of Engine|Page 1626
Page 1
background image

Timing Belt: All Technical Service Bulletins
Timing Belt - Noise

Category 1
Applicable Model/s 1986-88 323 Non-Turbo
Subject TIMING BELT PULLEY
Bulletin No.

050/89

Issued

12/29/89

Revised

DESCRIPTION

During normal operation, the timing belt moves toward the front of the engine and in some cases may contact the timing belt guide plate. This can cause
a squeaky noise at idle after the engine is warmed up.

To correct the problem, the timing belt guide plate has been modified as shown. As you can see, the modified configuration is two (2) pieces.
If you encounter the squeak noise around the front of the engine, follow the checking procedure in this Service Bulletin.

CHECKING PROCEDURE

1.

Remove the upper timing belt cover.

Timing Belt - Noise|Page 1631 > < Timing Belt - Squeak Noise at Idle from Front of Engine|Page 1626