323 L4-1600 1597cc (1986)
Fig. 23 Rotating throttle sensor.
4.
Rotate throttle position sensor clockwise approximately 30°, then rotate it back counterclockwise until continuity exist Fig. 23.
Fig. 22 Thickness gauge chart.
5.
Replace thickness gage with .027 inch gage and ensure continuity does not exist Fig. 22. If continuity exist, repeat steps 3 and 4.
6.
Tighten two attaching screws. Be careful not to move throttle sensor from set position when tightening screws.
7.
Open throttle valve fully a few times, then recheck adjustment.