mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Clutch Release Bearing, M/T > < Neutral Switch|Page 2799
Page 1
background image

Clutch Pedal Assembly: Adjustments

1986-88 323 EXC. 1988 4WD

1.

Measure distance from upper center of pedal pad to firewall and ensure distance (height) is 8.44-8.64 inches.

2.

If not, adjust pedal height by loosening locknut and turning clutch switch until specified height is obtained.

3.

Depress pedal by hand and measure pedal freeplay. Ensure freeplay is .35-.59 inch. If not, adjust clearance by depressing release lever and pulling
pin away from lever. Turn adjusting nut until a clearance of .06-.10 inch is obtained.

4.

After adjustment, ensure that when the clutch is disengaged, the distance between floor and upper center of pedal pad is approximately 3.3 inches
or more.

Clutch Release Bearing, M/T > < Neutral Switch|Page 2799