323 L4-1800cc 18L OHC (1991) | Wheel Bearing Service & Repair
1. Press the wheel hub in with the SST.
Oil Seal
Caution:
Use a new oil seal, and apply grease to the lip of the seal.
Install the oil seal flush with the knuckle.
1. Install the new oil seal with the SST.
Hub Nut
Install a new nut, and stake it as shown.
Tightening torque: 177-235 Nm (18-24 m-kg, 130-174 ft lb)
After installation, check the rear wheel alignment.
