323 L4-1800cc 1.8L OHC (1991)
Steering lock mounting bolts and bracket
Use a chisel to make a groove in the head of the steering lock mounting bolts. Remove the bolts with a screwdriver; then remove the steering lock
assembly.
Caution:
^
Secure the shaft in a vise protected with brass pads or cloth.
INSPECTION
Check for the following and replace the assembly if necessary.
Steering Shaft
1. Column bushing wear
2. Steering shaft length
Specified length: 559.3 ± 1mm (22.02 - 0.04 in)
Intermediate shaft
Universal joint looseness, abnormal noise, or sticking