mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Front Strut - Noise While Turning|Page 3781 > < Stabilizer Bar, Sway Control|Specifications|Page 3772
Page 1
background image

Suspension Strut / Shock Absorber: Customer Interest
Front Strut - Noise While Turning

Bulletin No.
012/92

Issued
7/22/92

Revised

Category 
R

Applicable Model/s 
1990-'92 323/Protege

Subject 
FRONT STRUT NOISE WHILE TURNING

DESCRIPTION

Noise from the front of the car may be noticeable while turning. This may be more pronounced at low speeds and in cold weather.

This is likely caused by dirt accumulation in the top strut mount bushing causing excessive friction.

A groove was added to the front strut bushing to help keep dirt from entering the sliding surface of the bushing. Figure 1.

VIN OF PRODUCTION CHANGE

JM1BG****M0311279

August 1, 1991

JM1BG****N0401717

August 1, 1991

REPAIR PROCEDURE

Install the new strut bushings according to Workshop Manual procedures in Section R.

NOTE:
Before removing strut assembly, place a reference "Mark" on the strut block-to-inner fender. This will assure original position of wheel alignment when
reinstalling the strut.

PARTS INFORMATION

PART NUMBER

NEW

OLD

DESCRIPTION

QTY

INTERCHANGEABILITY

B455 34 38XA

B455 34 38X

Bushing

2

NEW -> OLD

Front Strut - Noise While Turning|Page 3781 > < Stabilizer Bar, Sway Control|Specifications|Page 3772