323 L4-1800cc 1.8L OHC (1991)
Shift Solenoid: Service and Repair
SOLENOID VALVES REMOVAL/INSTALLATION
1. Disconnect the solenoid connector.
2. Remove the control valve body.
3. Remove the solenoid valve.
4. Apply ATF to a new O-ring and install it, a new solenoid valve, and the oil strainer component.
Tightening torque 7.9 - 10.7 Nm (80 - 110 kgf-cm, 70 - 95 inch lbs.)
5. Install the control valve body.
6. Lightly apply silicone sealant to both sides of a new oil pan gasket.
7. Install the new gasket and install the oil pan.
Tightening torque 8.4 - 10.7 Nm (85 - 110 kgf-cm, 74 - 95 inch lbs.)
8. Connect the solenoid connector.
9. Connect the negative battery cable.
10. Carry out the time lag test and line pressure test.
11. Carry out the road test.
