5 L4-2.3L (2007)
Front Door Panel: Service and Repair
Front Door Trim Removal/Installation
FRONT DOOR TRIM REMOVAL/INSTALLATION
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Open the cap using a small flathead screwdriver and remove the screw.
4. Remove the inner handle cover.
5. Disconnect the door lock switch connector.
6. Remove the inner garnish.
7. Remove the switch panel.
8. Detach clips A from the front door using a fastener remover.
9. Pull the front door trim upward and detach tabs B from the front door.
10. Remove the front door trim.
11. Install in the reverse order of removal.
