5 L4-2.3L (2007)
Front Door Window Motor: Service and Repair
Front Door Module Removal/Installation
FRONT DOOR MODULE REMOVAL/INSTALLATION
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Inner garnish
2. Front door trim
3. Front door speaker
4. Front door glass
5. Inner handle
4. Disconnect the power outer mirror connector.
5. Disconnect the front door wiring harness connector.
6. Remove the tab, then remove the front door wiring harness bracket.
7. Remove screws A and the fastener.
8. Remove the front door module.
9. Install in the reverse order of removal.