5 L4-2.3L (2007)
Disc Pad Removal Note
1. Remove the disc pad (outer side) from the mounting support.
2. Remove-the disc pad-(inner side)-from the-mounting support. (B-type)
3. Pull the disc pad (inner side) in the direction of the arrow to remove it from the caliper as shown in the figure. (A type)
Disc Pad Installation Note
1. Clean the exposed area of the piston.
2. Install the SST (49 F043 002) to the SST (49 B043 005).
3. Align the SST projection to the piston groove.
