5 L4-2.3L (2007)
4. Rotate part A on the SST in the direction of the arrow and secure the SST to the caliper.
5. Rotate the SST in the direction of the arrow and push the piston completely into the caliper.
Note:
^
Even with the piston completely pushed in, the top the piston projects from the dust seal by approximately 2 mm (0.09 in).
6. Rotate part A on the SST in the direction of the arrow using the tool and remove the SST from the caliper.
7. Align the disc pad (inner side) spring into the piston groove, and insert it in the direction of the arrow. (A type)
8. Install the disc pad (inner side) to the mounting support. (B type)
9. Install the disc pad (outer side) to the mounting support.
