5 L4-2.3L (2007)
Coolant: Technical Service Bulletins
Cooling System - Pre-Mixed Long-Life FL22 Coolant Info.
TSB: 01-033/07
MULTI-MODEL - PRE-MIXED LONG-LIFE "FL22" ENGINE COOLANT
NOTE:
This bulletin replaces 01-029/05. Please update your records accordingly.
BULLETIN NOTE
This bulletin supersedes the previous bulletin 01-029/05, issued on 11/04/05. The APPLICABLE MODEL(s)/VINS and DESCRIPTION have been
revised.
APPLICABLE MODEL(S)/VINS
2005 - 2006 MPV vehicles with VINs greater than JM3LW28**5*546928
2005 - 2008 RX-8 vehicles with VINs greater than JM1FE17**5*155009
2007 Mazdaspeed6 vehicles with VINs greater than JM1GG****7*110220
2006 - 2008 MX-5
2006 - 2008 Mazda5
2006 - 2008 Mazda6
2007 - 2008 CX-7
2007 - 2008 CX-9
DESCRIPTION
To enhance service life, reduce waste material, and lower maintenance costs, long-life pre-mixed "FL22" engine coolant has been introduced into
mass-production for the applicable models listed in this service bulletin.
Models with FL22 long-life coolant can be identified by the "FL22" marking on the cooling system cap label. It is recommended that FL22 coolant
continue to be used for models originally filled with FL22 coolant from the factory.
NOTE:
FL22 coolant is "pre-mixed" and must be added to the cooling system as is. DO NOT ADD WATER TO FL22 COOLANT. Adding water will dilute
the solution and lessen the effectiveness of the coolant.
When coolant replacement becomes necessary for older Mazda models not originally filled with FL22 coolant, FL22 coolant can be used. If FL22
coolant is used for older models, be sure to place a FL22 sticker on the reserve tank or degas bottle to indicate FL22 coolant is being used. Six (6) FL22
stickers are included with each case of coolant. Additional FL22 stickers can be order through MStore (p/n 9999-95-FL22).
