mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine - Vibration At Cruising Speeds (55 MPH)|Page 1704 > < Drive Belt Tensioner|Testing and Inspection
Page 1
background image

Engine Mount: All Technical Service Bulletins
Engine - Vibration At Cruising Speeds (55 MPH)

Bulletin No: 03-003/10 

Last Issued: 06/30/2010

Subject:

BODY VIBRATION AT CRUISE SPEED

BULLETIN NOTE

*Changes are also noted by asterisks.*

APPLICABLE MODEL(S) / VINS

*2004-2009 Mazda3
2006-2010 Mazda5*

DESCRIPTION

Some vehicles may experience a body vibration when driving approximately 55mph. This symptom is due to the characteristics of the No.3 & No.4
engine mounts.

Modified No.3 & No.4 engine mounts have been established for service only. Customers having this concern should have their vehicle repaired using the
following repair procedure.

REPAIR PROCEDURE

IMPORTANT NOTE:

^

This repair should only be performed if all tires and rims are confirmed to be in balance and all suspension components are in proper working
condition.

^

Notify customers that use of the modified mounts will reduce vibration at cruising speed but may increase vibration at idle.

Engine - Vibration At Cruising Speeds (55 MPH)|Page 1704 > < Drive Belt Tensioner|Testing and Inspection