mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Control Assembly, HVAC|Locations > < Condenser HVAC|Testing and Inspection|Page 6119
Page 1
background image

Control Assembly: Technical Service Bulletins
A/C - Control Unit Bulb Replacement

Bulletin No: 07-008/08

Last Issued: 12/12/2008

Subject:
CLIMATE CONTROL UNIT BULB REPLACEMENT

APPLICABLE MODEL(S)/VINS
2006 - 2009 Mazda5

DESCRIPTION

When you encounter a concern where the bulb (1) in the climate control unit (2) needs to be removed or replaced, make sure to install the bulb correctly.
If not installed correctly, the bulb will generate excessive heat due to an insufficient connection, and may fail in a couple of months.

For a correct installation, rotate and align the bulb socket with the two markings on the climate control unit.

NOTE:

When you remove the bulb, you can identify whether the bulb was installed correctly or not by looking at the plastic covering over the bulb. If the
bulb was installed incorrectly, the plastic covering will look distorted. Make sure to install the bulb correctly.

Control Assembly, HVAC|Locations > < Condenser HVAC|Testing and Inspection|Page 6119