5 L4-2.3L (2007)
14. Install the short harness with resistor to the connector, then connect the evaporator temperature sensor connector to it.
15. Reassemble in the reverse order of removal.
16. Reconnect the negative battery cable.
17. Verify repair.
18. Enter the customer's radio presets and set the clock.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
^ This repair will be covered under Mazda's New Vehicle Limited Warranty term.
^ Additional diagnostic time cannot be claimed for this repair.