5 L4-2.3L (2007)
PCM terminals
-
1 R (+)-body ground (-)
Oscilloscope setting
-
5 V/DIV (Y), 1 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up
Purge control signal
PCM terminals
-
2C (+)-body ground (-)
Oscilloscope setting
-
2 V/DIV (Y), 10 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up
APP sensor signal
Accelerator pedal is released
Accelerator pedal is depressed
PCM terminals
-
1AO (+)-body ground (-)
Oscilloscope setting
-
2.5 V/DIV (Y), 2 ms/DIV (X), DC range
Vehicle condition
-
Ignition switch is turned to the ON position.
(engine off)
