5 L4-2.3L (2007)
PCM terminals
-
2M (+)-body ground (-)
Oscilloscope setting
-
0.5 V/DIV (Y), 2 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up (engine speed approx. 650 rpm, no load, A/C off)
Generator output voltage signal
PCM terminals
-
2AF (+)-body ground (-)
Oscilloscope setting
-
2 V/DIV (Y), 1 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up
IGT1, IGT2, IGT3, IGT4 signals
PCM terminals
-
IGT1 (No.1): 2G (+)-body ground (-)
-
10T2 (No.2): 2K (+)-body ground (-)
-
IGT3 (No.3): 2L (+)-body ground (-)
-
IGT4 (No.4): 2H (+)-body ground (-)
Oscilloscope setting
-
4 V/DIV (Y), 0.01 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up
