5 L4-2.3L (2007)
Transmission Position Switch/Sensor: Adjustments
TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT (FN4A-EL)
1. Remove the battery duct and battery cover.
2. Disconnect the negative battery cable.
3. Remove the undercover.
Caution:
^
Water or foreign material entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign
material on the connector when disconnecting it.
4. Remove the clip and disconnect the selector cable.
5. Rotate the manual shaft to the converter housing side fully, then return two notches to set the N position.
6. Disconnect the TR switch connector.