5 L4-2.3L (2007)
3. Connect the SST (Deployment tool) to the SST (Adapter harness).
4. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the
negative battery terminal.
5. Verify that the red lamp on the SST (Deployment tool) is illuminated.
6. Verify that all persons are standing at least 6 m (20 ft) away from the vehicle.
7. Press the activation switch on the SST (Deployment tool) to operate (deploy) the side air bag module.
8. Disconnect the SSTs (Deployment tool) from the SSTs (Adapter harness).
Curtain Air Bag Module
1. Remove the C-pillar trim.
2. Disconnect the curtain air bag module connector
3. Connect the SST (Adapter harness) to the curtain air bag module as shown in the figure.
4. Connect the SST (Deployment tool) to the SST (Adapter harness).
5. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive battery terminal, and the black clip to the
