5 L4-2.3L (2007)
Seat Belt: Service and Repair
Second-Row Seat Belt
SECOND-ROW SEAT BELT REMOVAL/INSTALLATION
CAUTION: The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be
rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
1. Remove the following parts.
1. Rear package tray lid
2. Third-row seat
3. Rear scuff plate
4. Trunk end trim
5. Third-row seat belt lower anchor installation bolt
6. Trunk side trim
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
