5 L4-2.3L (2007)
Wheel Speed Sensor: Service and Repair
Rear
REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
1. Remove the under cover (rear).
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
ABS Hole Cover Removal Note
1. Disconnect the rear auto leveling sensor connector. (Vehicles with auto leveling sensor)
2. Press the tab of the ABS hole cover to separate the ABS hole cover from the body.
3. Remove the ABS hole cover from the body.
Rear ABS Wheel-speed Sensor Wiring Harness Installation Note