5 L4-2.3L (2007)
Power Window Switch: Testing and Inspection
Power Window Main Switch
POWER WINDOW MAIN SWITCH INSPECTION
Driver's Side
1. Measure the voltage at each terminal (other than terminal 1M).
-
If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item(s)" and related wiring harnesses.
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Inspect the power window main switch connector for continuity at terminal 1M.
5. If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the power
window main switch.
Except Driver's Side
