5 L4-2.3L (2007)
NOTE:
It may be necessary to use a screwdriver to pry the bracket off.
6.
Remove the right front stabilizer bushing.
NOTE:
It may be necessary to lightly push or pull on the side of the stabilizer bar where it meets the stabilizer control link to allow clearance.
7.
Clean the area on the stabilizer bar where the bushing goes.
8.
Apply a light coating of locally sourced white lithium-soap based grease to the inner cylindrical surface of the new front bushings.
9.
Install the new right front bushing.
10.
Install the right front stabilizer bracket.