5 L4-2.3L (2007)
Clutch Slave Cylinder: Service and Repair
CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION
1. Remove the under cover.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Clutch Pipe Removal Note
1. Pull the clip to the position shown in the figure and pull out the clutch pipe connector straight to detach it.
Clutch Pipe Installation Note
1. Return the clip to the position shown in the figure.
Caution:
^
Verify that there is no chipping or damage to the seal ring of the clutch pipe connector.
2. Insert the clutch pipe connector straight.