5 L4-2.3L (2007)
1. Use the SSTs to install the pilot bearing.
Flywheel Removal Note
1. Hold the flywheel using the SST.
2. Remove the bolts evenly and gradually in a crisscross pattern.
3. Remove the flywheel.
4. Inspect for oil leakage from the crankshaft rear oil seal.
^
If there is any malfunction, replace the crankshaft rear oil seal.
Flywheel Installation Note
1. Install the flywheel to the crankshaft.
2. Clean the crankshaft thread holes before installing the new lock bolts.
3. Hand-tighten the flywheel lock bolts.