5 L4-2.3L (2007)
14. Inspect the resistance between the TR switch terminals B and C.
^
If there is any malfunction, readjust the TR switch.
Resistance
750 ohms
15. Tighten the TR switch mounting bolts.
Tightening torque
8-11 Nm (82-112 kgf.cm, 71-97 in.lbf)
Caution:
^
Do not use an impact wrench. Hold the manual shaft lever when removing the manual shaft nut, or the transaxle may be damaged.
16. Install the manual shaft lever and the washer.
17. Set the adjustable wrench as shown in the figure to hold the manual shaft lever, and tighten the manual shaft nut.
