6 L4-2.5L (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Removal/Installation
COWL PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the windshield wiper arm. (See See: Wiper and Washer Systems/Wiper Arm/Service and Repair)
3. Remove the front fender molding. (See See: Cowl Grille Removal/Installation)
4. Remove the cowl grille. (See See: Cowl Grille Removal/Installation)
5. Remove the windshield wiper motor. (See See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal and Replacement)
6. Remove the washer hose grommet from the cowl panel and disconnect the front washer hose.
7. Remove the bolts, then remove the stay.
8. Remove bolts.