6 L4-2.5L (2010)
Thermostat: Testing and Inspection
THERMOSTAT INSPECTION [L5]
1. Remove the thermostat. See: Service and Repair
2. Visually check that the thermostat valve is closed.
3. Place the thermostat in water.
WARNING:
-
During inspection, the thermostat and water are extremely hot and can cause severe burns. Do not touch the thermostat and water.
4. Heat the water and check the following.
-
Opening temperature and valve lift
-
If there is a malfunction, replace the thermostat. See: Service and Repair
Thermostat initial-opening temperature
-
80-84 °C {176-183 °F}
Thermostat full-open temperature
-
97 °C {207 °F}
Thermostat full-open lift
-
More than 8.0 mm {0.31 in}