mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Exhaust System - Squeak/Rattle From Converter Area|Page 2026 > < Exhaust System - Squeak/Rattle From Converter Area|Page 2020
Page 1
background image

Catalytic Converter: All Technical Service Bulletins
Exhaust System - Squeak/Rattle From Converter Area

Bulletin No: 01-044/10 
Last Issued: 08/06/2010

Subject:

SQUEAK / RATTLE NOISE FROM EXHAUST SYSTEM

APPLICABLE MODEL(S)/VINS

2009-2010 Mazda6 2.5L with Automatic Transmission

^

Cal. Spec. vehicles built before Dec. 21, 2009 production

^

Fed. Spec. vehicles built before Feb. 10, 2010 production

DESCRIPTION

Some vehicles with higher mileage may exhibit a squeak/rattle noise from the exhaust system's converter flange area. The noise may be caused by
tension between the seal ring and mating surface.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

WARNING:

As with all exhaust system repairs, please carry out each step with special attention towards avoiding exhaust leakage that might cause deadly carbon
monoxide to escape at any point under the vehicle.

NOTE:

Be sure to follow the repair procedure, otherwise, the symptom will recur.

1. Verify customer concern.

2. Safely lift vehicle on hoist.

Exhaust System - Squeak/Rattle From Converter Area|Page 2026 > < Exhaust System - Squeak/Rattle From Converter Area|Page 2020