6 L4-2.5L (2010)
b. Wrap the drive belt, which is no longer of use, tightly around the A/C compressor pulley.
c. Hold the drive belt in place with pliers.
d. Remove/installation the bolt.
Tightening torque
-
20-22 Nm {2.0-2.2 kgf-m, 15-16 ft-lbf}
Snap Ring Removal/installation Note
1. Remove/installation the snap ring using a snap ring pliers.
A/C Compressor Pulley Removal Note
1. Remove the A/C compressor pulley using the SSTs(49 0839 425C, 49 U027 001).