6 L4-2.5L (2010)
Technical Service Bulletin # 0701309
Date: 091223
Campaign MSP28 - Water Leak From HVAC Housing
Bulletin No: 07-013/09
Last Issued: 12/23/2009
Subject:
MAZDA SERVICE PROGRAM (MSP28) - WATER LEAK FROM HVAC CASE
APPLICABLE MODEL(S)/VINS
2010 Mazda6 vehicles with VINs 1YVHZ8***A5M14215 - M17296
(produced from October 5, 2009 through October 6, 2009)
DESCRIPTION
On certain 2010 Mazda6 vehicles, water may leak from the HVAC case. This concern may be due to a blocked drain port.
NOTE:
^ UNDER THE MAZDA SERVICE PROGRAM (MSP28), ALL CURRENT DEALER INVENTORY AND RETAILED VEHICLES FOUND TO BE
WITHIN THE ABOVE VIN AND PRODUCTION DATES RANGES MUST BE REPAIRED ACCORDING TO THE INSTRUCTIONS
CONTAINED IN THIS SERVICE BULLETIN.
^ BEFORE PERFORMING ANY REPAIR, VALIDATE THAT THE VEHICLE IS APPLICABLE TO THIS PROGRAM BY PERFORMING AN
"eMDCS WARRANTY VEHICLE INQUIRY" AND VERIFYING THE VEHICLE DISPLAYS CAMPAIGN "MSP28" AND ITS CAMPAIGN
STATUS DISPLAYS "OPEN". SEE "VEHICLE INSPECTION PROCEDURE" BELOW.
DEALER INVENTORY
Repair all applicable vehicles currently in dealer inventory according to the procedures contained in this service bulletin.
RETAIL VEHICLES:
When an applicable retail vehicle is brought into the dealer for any type of repair or scheduled maintenance, perform an eMDCS Warranty Vehicle
Inspection and check the status of MSP28. If status of MSP28 is "OPEN" repair the vehicle according to the procedures contained in this service
bulletin.
VEHICLE INSPECTION PROCEDURE
1. Verify the vehicle is within the following VIN and production date ranges:
2010 Mazda6 vehicles produced from October 5, 2009 through October 6, 2009
^ VIN Range: 1YVHZ8***A5M14215 - M17296
-
If the vehicle is within the above VIN and production date ranges, proceed to Step 2.
-
If the vehicle is not within the above VIN and production date ranges, return the vehicle to the customer or inventory.
