6 L4-2.5L (2010)
Evaporator Temperature Sensor / Switch: Testing and Inspection
Evaporator Temperature Sensor Inspection - Full-Auto Air Conditioner
EVAPORATOR TEMPERATURE SENSOR INSPECTION [FULL-AUTO AIR CONDITIONER]
1. Set the fan speed MAX HI.
2. Set the temperature control at MAX COLD (Turn the left).
3. Turn the A/C switch off.
4. Set the RECIRCULATE mode.
5. Close all doors and windows.
6. Wait for 5 min.
7. Remove the glove compartment. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
8. Disconnect the evaporator temperature sensor connector. See: Service and Repair/Evaporator Temperature Sensor Removal/Installation -
Full-Auto Air Conditioner
9. Measure the temperature at the blower inlet.
10. Measure the resistance between terminals of the evaporator temperature sensor.
-
If the resistance is not as shown in the graph, replace the evaporator temperature sensor.