6 L4-2.5L (2010)
Turn Signal Bulb: Service and Repair
Parking/Front Turn Light Bulb Removal/Installation
PARKING/FRONT TURN LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the fasteners and slightly bend back the mudguard.
3. Rotate the parking/front turn light socket in the direction of the arrow (1) shown in the figure.
4. Pull the parking/front turn light socket in the direction of the arrow (2) shown in the figure and remove it.
5. Remove the parking/front turn light bulb.
6. Install in the reverse order of removal.
