6 L4-2.5L (2010)
2. Add the ATF.
a. Install a new washer and the drain plug.
Tightening torque
-
30-41 Nm {3.1-4.1 kgf-m, 23-30 ft-lbf}
b. Install the aerodynamic under cover NO.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
c. Add the specified ATF through the oil filler tube.
ATF Type
-
Mazda Genuine ATF M-V
ATF Capacity (approx. quantity)
-
Draining ATF from drain plug: 3.0 L {3.2 US qt, 2.6 lmp qt}
-
Overhauling transaxle: 5.0 L {5.3 US qt, 4.4 lmp qt}
d. Install the oil dipstick.
3. Inspect the ATF level. See: Procedures/Automatic Transaxle Fluid (ATF) Inspection - FS5A-EL
