6 L4-2.5L (2010)
Knock Sensor: Service and Repair
KNOCK SENSOR (KS) REMOVAL/INSTALLATION [L5]
1. Disconnect the negative battery cable.
2. Remove the plug hole plate. See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Plug Hole Plate
Removal/Installation
3. Remove the intake manifold. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
4. Disconnect the KS connector.
5. Remove the KS.
6. Install in the reverse order of removal.
