6 L4-2.5L (2010)
Vehicle condition
-
Idle (immediately after starting the engine)
Purge control signal
PCM terminals
-
2C(+)-body ground(-)
Oscilloscope setting
-
10 V/DIV (Y), 20 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up
OCV control signal
PCM terminals
-
2E(+)-body ground(-)
Oscilloscope setting
-
2 V/DIV (Y), 0.8 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up
CMP sensor signal
PCM terminals
-
2S(+)-body ground(-)
Oscilloscope setting
-
1 V/DIV (Y), 25 ms/DIV (X), DC range
Vehicle condition
-
Idle after warm up