6 L4-2.5L (2010)
6. Disconnect the clip C, D from the front seat.
7. Disconnect the clip E, F from the front seat.
8. Remove the bolts.
9. Remove the side air bag module.
10. Install in the reverse order of removal.
11. Switch the ignition to ON.
12. Verify that the air bag system warning light illuminates for approx. 6 s and goes out.
-
If the air bag system warning light does not operate normally, refer to the on-board diagnostic system (air bag system) and perform inspection
of the system. See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Flowchart