6 L4-2.5L (2010)
Backup Lamp Switch: Service and Repair
BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [G66M-R]
1. Disconnect the negative battery cable.
2. Remove the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
3. Drain the oil from the transaxle. See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transaxle Oil Replacement - G66M-R
4. Disconnect the back-up light switch connector and remove the back-up light switch.
5. Install the back-up light switch (with a new gasket) to the transaxle case.
Tightening torque
-
20-29 Nm {2.0-2.9 kgf-m, 15-21 ft-lbf}
6. Add the specified amount and type of oil. See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transaxle Oil Replacement - G66M-R
7. Install the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
