6 L4-2.5L (2010)
Neutral Safety Switch: Testing and Inspection
NEUTRAL SWITCH INSPECTION [L5]
Continuity Inspection
1. Disconnect the negative battery cable.
2. Remove the neutral switch. See: Powertrain Management/Transmission Control Systems/Sensors and Switches - Transmission and
Drivetrain/Sensors and Switches - M/T/Gear Sensor/Switch/Service and Repair
3. Inspect for continuity between the neutral switch terminals using an ohmmeter.
-
If not as specified, replace the neutral switch. See: Powertrain Management/Transmission Control Systems/Sensors and Switches -
Transmission and Drivetrain/Sensors and Switches - M/T/Gear Sensor/Switch/Service and Repair
Specification