6 L4-2.5L (2010)
Power Steering Pump: Testing and Inspection
Fluid Pressure Inspection
1. Assemble the SSTs as shown in the figure.
2. For the vehicles with MZI-3.7, remove the following parts.
a. Windshield wiper arm See: Wiper and Washer Systems/Wiper Arm/Service and Repair
b. Cowl grille See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Grille Removal/Installation
c. Windshield wiper motor See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal and Replacement
d. Cowl panel See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Panel Removal/Installation
e. Bolts shown in the figure
3. Disconnect the pressure hose from the power steering oil pump, and connect the SSTs.
