6 L4-2.5L (2010)
Power Steering Pressure Switch: Testing and Inspection
POWER STEERING PRESSURE (PSP) SWITCH INSPECTION [L5]
Continuity Inspection
1. Inspect the following if the power steering is inoperative (See See: Power Steering/Power Steering Fluid/Testing and Inspection.):
-
Power steering fluid level
-
Power steering fluid leakage
-
Power steering fluid pressure
2. Disconnect the PSP switch connector.
3. Start the engine.
4. Inspect for continuity between the PSP switch terminal and ground using a tester.
-
If not as specified, replace the PSP switch. (See See: Power Steering/Power Steering Pump/Service and Repair/Removal and Replacement.)
Specification
