6 L4-2.5L (2010)
-
Because the operation sound of the solenoid valve is small, perform inspection in a quiet place.
1. Disconnect the coupler component connector.
a. Disconnect the negative battery cable.
b. Remove the air cleaner component. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
c. Disconnect the coupler component connector.
2. Apply battery positive voltage to the coupler component terminals A, B, C, F or G and battery negative voltage to GND, and verify that operating
sound is heard from the solenoid valve.
-
If the operation sound is not heard, inspect the coupler component for continuity.
If coupler component has no malfunction, perform the "Off-vehicle inspection".
3. Apply battery positive voltage to the coupler component terminal D and battery negative voltage to terminal I, and verify that operating sound is
heard from the solenoid valve.
-
If the operation sound is not heard, inspect the coupler component for continuity.
If coupler component has no malfunction, perform the "Off-vehicle inspection".
Off-Vehicle inspection
1. Measure the resistance between the coupler component terminals.
-
If there is any malfunction, replace the solenoid valve. See: Service and Repair