mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Clutch Disc, M/T|Testing and Inspection|Page 4367 > < Clutch Disc, M/T|Testing and Inspection|Page 4365
Page 3
background image

Pilot Bearing Removal Note

NOTE:

-

The pilot bearing does not need to be removed unless you are replacing it.

1. Use the SST to remove the pilot bearing.

Flywheel Removal Note

1. Hold the flywheel using the SST.

2. Remove the bolts evenly and gradually in a crisscross pattern.

3. Remove the flywheel.

Flywheel Installation Note

1. Clean the crankshaft thread holes.

2. Install the flywheel to the crankshaft.

3. Hand-tighten the new flywheel lock bolts.

4. Install the SST to the flywheel.

5. Gradually tighten the flywheel lock bolts in a crisscross pattern.

Clutch Disc, M/T|Testing and Inspection|Page 4367 > < Clutch Disc, M/T|Testing and Inspection|Page 4365