6 V6-3.0L (2007)
13. Inspect the resistance between the terminals B and C.
^
If not as specified, readjust the TR switch.
Resistance 750 ohms
14. Tighten the TR switch mounting bolts.
Tightening torque 8 - 11 N-m (82 - 112 kgf-cm, 71 - 97 in-lbf)
Caution: Do not use an impact wrench. Hold the manual shaft lever when removing the manual shaft nut, or the transaxle may be
damaged.
15. Install the manual shaft lever and the washer.
16. Set the adjustable wrench as shown to hold the manual shaft lever, and tighten the manual shaft nut.
Tightening torque 32 - 46 N-m (3.2 - 4.7 kgf-m, 24 - 33 ft-lbf)
